Barr Automation Book a call

Find out why your line stops. Then fix it.

I'm Alexander Barr, a robotics and manufacturing engineer in North Carolina. I build machine monitoring, automatic production reports, inspection stations and custom fixtures for small manufacturers. Every job has a fixed price, and most are commissioned remotely.

You'll talk to the engineer who does the work. I reply within one business day.

Sample floor display from the Machine Monitoring package: live status, part counts, and the reasons machines stopped.

Fixed-price projects

Each project has a written scope and a price you agree to before work starts. No hourly billing that keeps running.

Automation Assessment

$1,500

Start here if you're not sure what to fix first.

I review two video walk-throughs of your floor and your production data, then send a written report ranking your top five automation and throughput opportunities. Each one comes with a budget estimate and a payback period.

  • Two guided video walk-throughs of your line
  • Review of your output, downtime and scrap data
  • Written report: top five opportunities, cost and payback for each
  • If the report doesn't give you at least one project worth doing, I refund the fee

Automated Production Reporting

$2,500setup, then $200 a month

Stop building the shift report by hand.

Shift, daily and job reports (output, scrap, first-pass yield, downtime by reason) built automatically from the ERP or MES exports and spreadsheets you already have. A shift summary lands in your inbox every morning.

  • Works from the exports and spreadsheets you already use
  • Morning shift summary by email
  • Monthly fee covers hosting, upkeep, and changes when your exports change

Machine Monitoring and OEE

$4,000 to $8,000

See every machine's status live, and why it went down.

Live OEE (availability, performance, quality), downtime with reason codes, cycle times, part counts, and alarm history with MTBF and MTTR, shown on floor displays with alerts.

  • Reads your PLCs over EtherNet/IP, Modbus TCP or OPC UA
  • Older machines with no PLC: discrete I/O or current sensors
  • Covers 5 to 20 machines
  • Your electrician installs; I commission it with you remotely

Vision and Gauging Station

$3,000 to $6,000

Catch bad parts before they ship.

Camera or laser-displacement inspection, in-line or at the end of the line: presence checks, dimensional checks and pass/fail. Every measurement is logged for traceability and SPC (control charts, Cpk).

  • Hardware included
  • Ships pre-built and calibrated
  • Commissioned with you over video

How a project runs

Remote doesn't mean hands-off. You'll know the scope, the price and who's doing the work before anything starts.

  1. Free 20-minute call

    Tell me what you make and what's slowing you down. I'll tell you honestly whether I can help.

  2. Fixed quote

    You get a written scope, price and timeline. Hardware is listed line by line.

  3. Build and test

    I build and test the system before anything reaches your floor.

  4. Install and commission

    Your electrician or maintenance tech installs it. I commission it with you over video.

  5. Support

    If something doesn't work as quoted, I fix it. Ongoing support is available if you want it.

Custom tooling and 3D-printed parts

Send a drawing, a photo or the broken part. I design it, print it in PETG, ASA or nylon, and ship it. It's also a low-cost way to try working together before a bigger project.

  • Assembly and inspection fixtures, nests, locators and go/no-go gauges
  • End-of-arm tooling: gripper fingers, vacuum-cup mounts, quick-change adapters
  • Sensor and camera brackets, machine guarding, covers and enclosures
  • Reverse-engineered replacement parts for obsolete equipment
Design
$100/hourmost parts take 1 to 3 hours
Printing
By machine timeplus material
Typical order
$150 to $600
To start
50% deposit

Sending a physical part? Mention it in your message and I'll send a shipping address.

Exploded CAD view of a 3D-printed ratchet clamp that holds a small laser module
Ratchet clamp for a laser module, exploded CAD view
The printed ratchet clamp tightened onto a flat plate
The same clamp, assembled and clamped in place
Exploded CAD view of a printed storage case that holds the clamp
Printed storage case for the clamp

Work I've done

Six years of building automation that runs on real production floors.

Inspection stations on a production floor

Built laser and camera inspection stations that run every day on a production floor.

Laser and camera inspection station

80+ channels of live sensor data

Wired more than 80 sensor channels into live telemetry.

Live sensor telemetry

A patent-pending robot

Designed a robot from the circuit board to the enclosure. Patent pending.

3D render of the robot's main circuit board
The robot's main board, from my PCB design

About me

I'm Alexander Barr. I've spent six years in robotics and manufacturing, most recently scaling a production line at a manufacturing startup. I started Barr Automation to bring the same tools to shops that don't have an automation engineer on staff.

  • ProductionScaled a production line at a manufacturing startup
  • EquipmentSemiconductor-equipment manufacturing
  • RoboticsUniversity robotics lab; patent-pending robot design

I'm based in North Carolina and work remotely with manufacturers across the US. On-site visits in the Carolinas and Virginia are available by arrangement.

See my background on LinkedIn

Questions

Do you ever come on-site?

Most work is done remotely: your team installs, and I commission over video. That keeps prices fixed and low. On-site visits in the Carolinas and Virginia are available by arrangement and quoted separately.

What equipment do you work with?

PLCs that talk EtherNet/IP, Modbus TCP or OPC UA, and older machines with no network at all, using discrete I/O or current sensors. Not sure what you have? Send a photo of the controller's nameplate.

Who owns the code, dashboards and data?

You do. When the project is paid for, you get the source files and full access to your data.

Does this need to connect to our office network?

It doesn't have to. Monitoring systems can run on their own network, separate from your office IT. We'll agree on how it connects, with your IT person if you have one, before I quote.

Is hardware included in the price?

For vision and gauging stations, yes. For machine monitoring, sensors, gateways and displays are listed line by line in your fixed quote, so you see exactly what you're paying for.

What does the $200 a month for reporting cover?

Hosting, keeping the reports running, and updating them when your ERP or spreadsheet exports change.

Will you sign an NDA?

Yes. Send yours, or I can send a simple mutual NDA.

How do I pay?

By card or bank transfer through Stripe. Your quote lists the payment schedule. You can also pay in Bitcoin (on-chain or Lightning) or USDC on Base and take 5% off; I'll send an invoice with the exact amount, and the rate is locked for 30 minutes.

Tell me what's slowing you down

Tell me what you make, what the problem is, and roughly how many people work on the floor. I'll reply within one business day.

Prefer email?

[email protected]

Rather talk it through?

Book a free 20-minute call

Have a drawing or photo?

Send the form first. I'll reply by email, and you can attach files to your reply.